Apart PIR7600 Stereo 6-Line 2-Mic 2-Zone IR Remote 1U
Product Description
Apart PIR7600 Stereo
The PIR7600 is a remote controlled stereo pre-amplifier.
It is very suitable for many appliocations like meeting rooms, board rooms, clubs, bars, restaurants, audiovisual, ... In brief every application that requires a pre-amplifier that can be controlled over distance; either by IR remote control or contact closure.
It comes with 6 line inputs and 2 MIC inputs (phantom power available via internal jumper). Microphone input 1 can be switched to microphone, line or telephone input level and mutes all other inputs via voice activation (VOX). A contact closure mute at the back pannel will mute all line inputs.
A separate tone and volume control is standard for the microphone and line inputs. The pre-amplifier is equipped with 2 stereo output zones.
The following functions can be controlled via the wired or infra-red remote control:
* Source selection (direct or via up - down)
* Master volume output 1
* System on / of
* Microphone only
* Mute
The 12V remote power output allows you to control external amplifiers or other electronics.
The IR extender passes the IR-control to any other equipment. The IR receiver, IR emitter and IR remote are included.
All this make the PIR7600 your ideal system solution, all at a price that is easy to live with!
Input : Line 1 : Euro Block Balanced 0 dB, 20 kOhm
Input : Line 2-6 : RCA Cinch, 500 mV, 10 kOhm
Input : Mic 1 : Front: Jack balanced -50 dB / 600 Ohm
Input : Mic 1 : Rear: Euro Block balanced -50 dB / 600 Ohm(Mic), -10 dB / 10k (Line), 0 dB / 600 Ohm(TEL)
Input : Mic 2 : Front: Jack balanced -50 dB / 600 Ohm
Input : Mic 2 : Rear: Euro Block balanced -50 dB / 600 Ohm
Output : Zone 1 : Euro Block balanced 0 dB / 100 Ohm
Output : Zone 2 : RCA Cinch 0 dB / 600 Ohm
Remote Power Output : Euroblock, 12V
Frequency Response : 20 Hz to 25 kHz
Distortion : < 0.01%
IR Receiver : Mini jack, IR Eye included (Ref: PIR-REC)
IR Output : Mini jack, IR emitter included (Ref: PIR-EMIT)
Handheld IR remote control : Included (Ref: PIR-REM)
Wired remote control input : RJ45
Dimensions (H x W x D) : 44 x 483 x 275 mm
Weight : 3.5 Kg
The PIR7600 is a remote controlled stereo pre-amplifier.
It is very suitable for many appliocations like meeting rooms, board rooms, clubs, bars, restaurants, audiovisual, ... In brief every application that requires a pre-amplifier that can be controlled over distance; either by IR remote control or contact closure.
It comes with 6 line inputs and 2 MIC inputs (phantom power available via internal jumper). Microphone input 1 can be switched to microphone, line or telephone input level and mutes all other inputs via voice activation (VOX). A contact closure mute at the back pannel will mute all line inputs.
A separate tone and volume control is standard for the microphone and line inputs. The pre-amplifier is equipped with 2 stereo output zones.
The following functions can be controlled via the wired or infra-red remote control:
* Source selection (direct or via up - down)
* Master volume output 1
* System on / of
* Microphone only
* Mute
The 12V remote power output allows you to control external amplifiers or other electronics.
The IR extender passes the IR-control to any other equipment. The IR receiver, IR emitter and IR remote are included.
All this make the PIR7600 your ideal system solution, all at a price that is easy to live with!


DJ Next Day is a 128Bit SSL secured website

